ELECTRIC ENGINEERING PROJECTS
 I.T.E.S.M. Instituto Tecnológico y de Estudios Superiores de Monterrey (Institute of Technology and High Studies of Monterrey)
TECHNOLOGIC STADIUM
Installation of outdoor substation composed of high voltage interrupting device (Driescher). Transformer 500 KVA, 13200/220-127 volts, "OA" type and low voltage switchboard HCB type with a general circuit breaker Masterpact type and 17 branch circuit breaker.
Raceways and wiring installation for towers lighting panelboards and all their services.
AGRICULTURAL EXPERIMENTAL FIELD (I.T.E.S.M.) Greenhouse installation consisting of electrical and control installation for equipment to achieve an automatic development.
GYMNASIUM (I.T.E.S.M.) Installation of indoor substation composed of high voltage interrupting device (Driescher). 225 KVA Transformer 13200/220-127 volts "OA" type and low voltage switchboard HCB type with a general circuit breaker, Masterpact type and 12 branch circuit breaker.
Underfloor raceways and wiring installation to supply 5 pumps using approximately 200 meters of PVC 80 schedule rigid nonmetallic conduit.
Control installation of 5 outdoor deep tanks.
VII BUILDING (I.T.E.S.M.) Lighting fixtures and receptacles. Installation of 160 fluorescent lamps 2x75 watts in 20 rooms and their receptacles.
Training room: Installation of 160 fluorescent lamps 4x39 watts, 73 lighting fixtures 1x39 watts in 5 rooms and their receptacles.
Lighting fixtures and receptacles. Installation of 170 fluorescent lamps 4 x 39 Watts.
Power: Switchboard installation with 21 branch circuit breaker (wiring installation included) for each load center building
Power distribution for 9 panelboards, 50 ton. Chiller and 14 boxes.
CENTRAL 3 (VII BUILDING) (I.T.E.S.M.) Electric Installation for two 500 HPcompressors screw type. Electric installation for 28 motors with several capacities since 3 HP to 60 HP in MCC machine room.
Automation with a computer central system with devices such as: Load sensors, level sensors, pressure transmissions, etc.
GENETEC (Offices)
Power Distribution: Installation of low voltage switchboard I-line type with general interrupting device y 5 branch circuit breaker. Raceways and wiring to supply 3 load centers y 3 air conditioner units.
Lighting: Installation of 26 metal halide lighting fixtures 250 watts, 19 metal halide lighting fixtures 400 watts, 10 lighting fixtures 500 watts, 10 fluorescent lamps 2x75 watts and 8 fluorescent lamps 2x39 watts.
Receptacles and telephony system: Installation of aluminum profile 6" width. Load Center with 42 spaces available with 50 output-receptacles.
C.Y.D.S.A. (Atlatec Offices)
Lighting: 22 fluorescent lamps 2x75 watts, 15 fluorescent lamps 4x39 watts with their load center, raceways, and wiring installation.
Receptacles and telephony system: Installation of aluminum profile 6" width. 2 Load Centers, one for 127 volts receptacles and the other one for regulated 127 receptacles. Wiring for telephony system.

QUIMOBASICOS S.A. DE C.V.
General grounded system.
Lighting and receptacles: Installation of 25 metal halide lighting fixtures 175 watts, 2 doubles lighting fixtures to air traffic.
Power and control: Raceways and wiring to supply 30 motors in several capacities. Raceways and wiring to 24 control units. Interconnection with Program Logic Controllers (PLC's) Allen Bradley serie 5. Installation and connection of mimetical panelboard.
Instrumentation: Raceways, wiring, installation, connection, and adjustment of 49 devices (sensors, switches and devices of velocity, manometers, thermometers, and solenoid valves).

ATLATEC. WASTE WATER TREATMENT PLANT SISTELEON ALLENDE
Electric Installation of waste water treatment plant, consisting in the following:
Installation of outdoor substation 225 KVA, 13200/440/254 Volts.
MCC's installation to supply 23 motors with several capacities since 1/2 HP to 100 HP's. (Control and power raceways included)
Raceways and wiring installation for lighting panelboard, raceways and wiring for general lighting.
Control installations.

ORION, S.A.
PROCESS AND SUBSTATION
Design of substation with 4 transformers 500 KVA/13.2KVA/440V, switchboard high life type with a high capacity switch.
Power system design and lighting design in process area (oven and enamel work line).
Electric Engineering Design: Substation, power distribution, lighting and receptacles, general grounded system, surge arresters system, and Control.
GRINDING
Power system design and installation for all grinding area, consistent in the following:
Lighting: Installation of 8 metal halide lamps 250 Watts, 4 metal halide 400 Watts, 32 fluorescent lamps 2 x 75 Watts y 2 mercury vapor lamp 250 Watts, receptacles 127 Volts and 440 volts, and transformers 45 KVA 440-220/127 V.
COMPRESSORS AND REFRIGERATING EQUIPMENT
Power Supplying of 3 compressor, 3 refrigerating equipment, 6 pumps (for water used in coolers) and MCC installation in this area.
Lighting fixtures and receptacles in compressors, coolers, laboratory, storage and maintenance areas. It were installed 77 fluorescent lamps 2x74 watts.
General grounded system and surge arrester systems of the Plant.
FLOOR PLANT
Supplying and Installation of straight voltage starter for motor 125 HP installed in grinder machine, and supply to periferic belts.
Engineering project in: Floors 320, enamel grinder, barbotina grinder, and dryer No. 5.
SANITARY EQUIPMENT PLANT
MORI #8 OVEN

RANCHO CERRO DE AGUA Y RANCHO LOS ENEBROS
Installation of 3 substation 300KVA 34.5KV/480V.
Installation of 3 motor 200HP with straight voltage starter for deep tanks pumps. Manufacturing and connection of 3 overcurrent protection panelboards for automatic irrigation system (3/4, 5/6, 7/8).
Installation of substation 500 KVA for irrigation pumps (9 y 10).

SIGMA ALIMENTOS NORESTE S.A.
Design and Installation for several projects.
Bone and defrost corridor project. Paste and Fessmann areas project.
Pail proyect first stage (June, 1990) and second stage (February, 1993)
Installing for this project the following:
MCC room and panelboards, raceways and wiring installation for control and power systems. Installation of 58 motors with several capacities since 5 HP to 250 HP.
Lighting for several projects using 89 lighting fixtures 250 watts.
Installation of 2 substations (750 KVA and 1500 KVA) both 13.2 KV/480 V.
Temperature control installation for 12 cooking and cooling pails (1.5 ton. per batch capacity).

SIGMA ALIMENTOS LACTEOS, S.A. DE C.V
Supplying and installation of indoor substation composed of high voltage interrupting device and transformer "OA" type 1000 KVA 13,200/460-266 V. Low voltage switchboard with general circuit breaker and 6 branch circuit breaker and interrupting device 1600 Amp.
Supplying and installation of 3 MCC for 68 motors with several capacities since 1 HP to 200 HP ( raceways and wiring for power and control included).
Supplying and installation of 2 switchboard FCII type with 600 Amp interrupting device and 7 branch circuit breaker.
Raceways and wiring installation for 7 lighting panelboards, installation of lighting fixtures and receptacles:
66 metal halide lamps 400 Watts in process area.
15 high pressure sodium lamps 250 Watts
22 high pressure sodium lamps 400 Watts with fixture studs for outdoor lighting.
Automatic control design for refrigeration rooms.
Design and manufacturing of control panelboard in power room, controlling the following equipment:
a) 2 tanks
b) 1 storage tank
c) 1 Hidropneumatic Tank(3 motors 20HP)
d) 2 boiler
e) Refrigerating system consisting in the following:
3 compressors Frick 200 HP
2 condenser Frick
5 pumps cool water (15 HP)
3 pumps glicol primary bank
3 pumps glicol secondary bank
2 air compressors (75 HP)
All the system used a PLC Telemecanique and Honeywell instrumentation.
Storage and Offices Project
Installation of 30 metal halide lamps 250 W. in storage warehouse yoghurt plant.
Raceways and receptacles installation for telephony system in offices.

K & T CLAY DE MEXICO, S.A. DE C.V.
Installation of outdoor substation 1500 KVA 13,200/480-227 Volts, Underfloor service of 100 meters to supply transformer. Protection panelboard 2000/2000 AMP. General grounded system for whole areas.
MCC installation to supply 53 motors with various capacities since 1/2 HP's to 250 HP's. (raceways and wiring installation for control and power included)
Raceways and wiring installation for 5 lighting panelboards; installation of lighting fixtures in process area and lighting outdoor.
General automation for the plant, integrating 250 devices (sensors, control valves, transmitters, temperature sensors, etc.) with a central computer system using a PLC Allen Bradley serie 5.

SIGMA ALIMENTOS CENTRO S.A. DE C.V. (Centeno Distribution Center)
 Installation of substation 500 KVA. 23000/460-257 VCA. con disconnecting device and high voltage measured device.
Protection panelboard with interrupting device, and surge arrester system installation.
MCC installation to supply 11 motors (diffuser's motors) since 1 HP to 125 HP..
Control system installation for refrigerating rooms.
Raceways and wiring for lighting: parkinglot area, Offices, bathrooms, charge and discharge areas, parkinglot in basement, and refrigerating room.
Receptacles installation for 50 refrigerating rooms trucks.

SIGMA ALIMENTOS CENTRO. PLANTA ATITALAQUIA
 Installation High Voltage service (23 KV) with a circuit breaker "All Duty" type and power/hv vacuum circuit breaker for outdoor service 23 KV, 1200 AMP and 200 meters underfloor raceways.
Installation of substation with 4 high voltage panelboards H251 type, 4 transformers 1500 KVA 23,000/440-254 V y 4 low voltage panelboards FCII type, all these panelboards with the following: 1 interrupting device 2000 A.D./3200 A.M. y 1 interrupting device 2000 A.D./3200 A.M.
Installation of 3 low voltage switchboard FCII type, one with interrupting device 2000 A.D./3200 A.M., other 1000 AMP with 52 branch circuit breaker, and another with interrupting device .
Installation of 8 MCC's and control and power wiring to supply 70 motors with several capacities since 1 HP to 500 HP.
Installation of 12 control lighting panelboards and receptacles in several areas.
Installation for general grounded system and surge arresters system.
REFRIGERATION PANELBOARD
Design, manufacture, installation and start up of control system panelboard, to control 6 cooling pails. The control system have an HMI (Human Machine Interface) computer software, the FIX Dmacs Intellution, using an industrial PC. IBM, and Windows platform.

SIGMA ALIMENTOS CONGELADOS (FROZEN FOOD PLANT)
Installation power system, lighting system and control system for whole plant with a compact substation 3000 KVA (each of 1500 KVA) with service in 13.8 KV and 460 VCA of voltage branch.
Power distribution to supply 160 motors in power room and process, lighting and receptacles in offices, dinning room, and bath room with 180 fluorescent lamps.
Electric and Control installation for 2 freezers spiral type -30 oC to freeze food.
Surge arresters distribution in process warehouse. Grounded system distribution in the process plant.

CEMENTOS TOLTECA (CEMENT PLANT)
Installation of substation 1500 KVA. 4160/460-257 VCA composed of high voltage overcurrent protection panelboard and low voltage switchboard 200 Amp. with digital measurement, to supply to coke's process: Discharge, storage and feeding of coke. Pulverization to burners for clinker.
Power and control distribution for 34 diffuser since 3 HP to 250 HP capacities from 3 MCC.
Control system installation with PLC's Allen Bradley Serie 5, 400 inputs/outputs.
Installation of lighting fixtures and receptacles in different classified areas such as Class II Div. 2, installing 48 lighting fixtures.

CEMENTOS MEXICANOS (CEMENT PLANT)
 Installation of substation 1500 KVA. 4160/460-257 VCA composed of high voltage overcurrent protection panelboard and low voltage switchboard 200 Amp. with digital measurement, to supply to coke's process: Discharge, storage and feeding of coke. Pulverization to burners for clinker.
Power and control distribution for 34 diffuser since 3 HP to 250 HP capacities from 3 MCC.
Control system installation with PLC's GE Fanve Serie 5 with 400 inputs/outputs.
Installation of lighting fixtures and receptacles in different classified areas such as Class II Div. 2, installing 48 lighting fixtures.

ZINCACERO (GALVANIZED IRON PLANT, ROLLED PLATE)
Installation of metal halide lamps 400W in 2 warehouse. Installation of 50 lighting fixtures including the raceways and wiring installation from switchboard.

CINTACERO (FISACERO)
Engineering, installation and start up support in electricity and control areas, to modify screw downs to Roll Bending in reversible grinder in the Plant #2

P U R I N A, S. A.
Design and construction of the new Plant to produce pet and cattle food with daily capacity of 300 Ton. This project was design and constructed in agreement with the area type, classified as hazardous location Class II Division I and Class II División II.
Installation of outdoor substation (NEMA 3R) composed of high voltage interrupting device and transformer 2000 KVA, 13200/460V.

P U R I N A, S. A. (Cuautitlán)
Batch system installation, raceways and wiring to supply all process equipment and control devices.
Process: Control systems for material transportation, checking off and selecting the control instruments and their raceways and wiring. Design and installation of I/O remote panelboards and installation turn-key systems of control and automation systems.
Packing area: Package conveyor installation, raceways design, wiring.

MOLINOS ST. JOAN S.A. DE C.V. (FLOUR PLANT)
Power and control installation for de this Plant.
Assembly, installation and supplying of MCC from substation. Power and control raceways and wiring for MCC #2 located in storage bin area, to 70 meters from substation.
Assembly, installation and connection of 2 straight voltage rating capacitor bank, of 330 KVAR and 250 KVAR in substation.
Raceways, wiring and connection of switchboard, lighting and receptacles.
Installation to supply air conditioner equipment, elevator and offices.
Raceways, wiring and connections of control and power system for pumps panelboard ubicated to 100 meters from substation.
Raceways, wiring and connections to supply hut.
Raceways, wiring and connections to supply a truck platform ubicated in wheat flour receiving bins area.
Raceways, wiring and connections to supply 250 motors distributed in 7 different levels: storage bins area, dirty wheat bins area, grinder area, terminated product area, wheat bins area, bran bins area, etc. with capacities since 3 HP to 100 HP.
Control raceways, wiring and connections: controllers in all levels and areas of the Plant.
Raceways, wiring and connections for more of 800 instruments such as solenoid valves, pressure sensors, velocity sensors, emergency stops, alarms, limit switches, weighing, etc. controlled by a PLC 155 Siemens.
Raceways, wiring, connections and assembly for PLC Siemens panelboard.

CONTROL ENGINEERING PROJECTS
PTR
SIGMA ALIMENTOS NORESTE
Necessity to pasteurize sausage packages where the products are carried throughout 80oC temperature, and then carried throughout 2oC.
It was installed a pasteurization machine with a system of 2 controllers, cooling and heating areas, temperature registers, conveyor starters and pumps.

PTR
SIGMA ALIMENTOS ATITALAQUIA
Necessity to pasteurize sausage packages to perform with the Standards.
It was installed a control system based on PLC for cooling and heating areas, and transportation system.

AMMONIA HIGH LEVEL ALARM
SIGMA ALIMENTOS
There was not exist a reliable detection system to ammonia high level, the operators realized a direct inspection of the level.
It was installed a floater system using a SQUARE-D PLC, to detect the ammonia high level for compressors stopping.

CHORIZO DRYER
SIGMA ALIMENTOS NORESTE
It was improve a new design to control the relative humidity in a room to dry chorizo using a closed loop control.
Installation of system with 1 Siemens PLC and Honeywell´s graphics register system.

DEFROST PAILS
SIGMA ALIMENTOS ATITALAQUIA
It was improve a new design with 2 pails to defrost meat, using water flowage and air injection.
Installation of Siemens PLC with an Operator Panel to show alarms and adjust the set points. Network integration with PLC´S, using a Supervisory Control and Data Acquisition Software FIX Dmacs.

SAUSAGE COOLING MACHINE
EMPACADORA CELAYA
Necessity to cool sausages rapidly after to cook the sausages. In coordination with a company dedicated to manufacture Food Industry Equipment, was built a cooling system (Ammonia-Water) to get a final temperature of 5 oC in the product. This Control System is composed of PLC and Operator Panel to display alarms and messages.

CIP CONTROL SYSTEM (WASHING SYSTEM)
SIGMA ALIMENTOS NORESTE
Necessity of Automatic Cleaning System to clean containers in pastas area for sausage process.
Installation of Automatic Cleaning System with water dosification, cool and hot water, soap and disinfectant for 2 pasta pails.

INVERTER IN TIROPAC 2000 MACHINE
SIGMA ALIMENTOS NORESTE
Installation of Inverter SIEMENS and changes in the control, achieving a good cutting sequence of the packages, to avoid package loses and to increase the production to double.

PUMP CONTROL AND PROTECTIONS
RANCHO AGUATOCHE
Installation of automatic system with the following characteristic:
Fault-Current Protection
Inversion and Detection Phase
High and Low Voltage Detection
Flow Out Detection
Over-current motor Detection
Straight Voltage Rating Start

All faults are displayed with indicators lamps.

COOLING SYSTEM
SIGMA ALIMENTOS ATITALAQUIA
New Plant with an installed ammonia system composed of injection valves, suction valves and gas valves, and diffusers to control 8 cooling system and 2 freezing rooms with 1750 tons of capacity.
Design and Installation of panelboard per room to control , to display and to change Set Points.

DATA ACQUISITION OF FESSMANN OVEN
SIGMA ALIMENTOS NORESTE
Because of our client entries in the U.S.A. market, with the highest quality standards such as TIF and USDA that demand historical trending in all cooking process, was required the installation of data acquisition system in 4 cooking ovens and 2 cooking pails for sausages, to display temperatures and calculate the humidity relative for each oven and pail, archiving all data in a PC using a data acquisition software FIX Dmacs, and 1 PLC Siemens.

CONTROL OF SALMUERA MIXER
QUENDAL
It was design a Control System adequate for the process to achieve an efficient system with just one worker.

HAM PAILS CONTROL SYSTEM
SIGMA ALIMENTOS ATITALAQUIA
 Installation of automatic control system for new Plant with 6 cooking pails and 6 cooling pails system to produce ham.
INSTALLED EQUIPMENT
1 PLC S5115U Siemens
2 PLC S595
1 Sinec L2 Network Siemens
1 IBM Industrial computer
1 Software FixDmac Intellution
200 Digital Input Signals
138 Digital Output Signals
56 Analog Input Signals
1 Operator Panel OP5 Siemens

HAM COOKING PAILS
EMBUTIDOS CORONA
 Necessity to control 4 cooking pails and to obtain historical trending of cooking temperatures.

BACON FREEZER MACHINE
SIGMA ALIMENTOS NOROESTE
Necessity of Temperature Control System for frozen product to freeze bacon to -8 centigrade.
Installation of Control system using a Siemens PLC and Operator Panel to supervise the ammonia refrigerating system and to be able to change setpoints, to display real-time temperatures, and process alarms.

BOTTLING MACHINE UB-7270
COCACOLA
Installation of Electronic System with a PLC 95U SIEMENS, and 3 inverters Siemens with an Operator Panel to display alarms, messages and to change the set point of velocity.

POWER CONSUMPTION SURVEYS (POWER MEASUREMENT)
COCACOLA
AXA YAZAKI
ORION
 Medition studies upon graphics with the following variables:
Voltage per element
Current per element
KW
VARS ( per quadrant)
KVA
Power Factor
Frequency
The survey is presented upon graphics and critical parameters analysis.

SAUSAGE PASTEURIZATION
LATINOAMERICANA, C.A. (CARACAS, VENEZUELA)
In association with Quendal, company dedicated to design and to manufacture equipment for food industry, was made and installed a Control System for machine to pasteurize packed sausages, this machine is composed of two sections: a hot section and a cool section.
Installation of panelboard with PLC Control System, and Operator Panel to change Set points, events and alarms display of 2 inverters to control the process velocity.

FROZEN FOOD PLANT CONTROL SYSTEM
SIGMA ALIMENTOS CONGELADOS
Necessity of control systems to integrate a whole new Plant to accomplish with the exportation standards such as USDA.
Integration of Control System for ammonia-air cooling system composed of:
14 Cooling Rooms
8 Cooking Systems controlled by PLC (KETTLES)
1 Data Acquisition System Fix Dmacs
Several control systems for power warehouse

POWER SAVING CONTROL SYSTEM
SIGMA ALIMENTOS NORESTE
With support of FIDE (Electric Energy Save Program) was realized a Control Demand Project, to control start and stop permissions for the principal equipment's in consumption energy in the Plant.

POWER HOUSE CONTROL ZACATECAS
EMPACADORA ZACATECAS
Installation of automatic valves to control 11 cooling rooms, temperature sensors, 1 new compressor 400 HP capacity, control for existing compressors and condensers.

POWER HOUSE CONTROL LAGOS DE MORENO, JALISCO
SIGMA ALIMENTOS LACTEOS
Necessity of control system for new Plant in Power House, this system include:
6 Frick Compressor
4 Condenser
4 Cooling Room
3 Air Compressor
1 Hydra-pneumatic System
2 Kettles
Installation of Centralized Control System with a Human Machine Interface (HMI) FixDmacs Intellution with Siemens PLC.

STOVE ASSEMBLER
MABE LEISER
Necessity of control system for new production lines. It includes transfers and transportation bands.
Installation of Distributed Control System with Touch Screen interfaces using General Electric equipment.
INSTALED EQUIPMENT
6 Main Control Panels
32 Remote Control Panels
5 Touch Screen Panels
2 Operator Panels GE.
Over 50 elements Networked on a Profibus Network.
Over 3000 Inputs / Over 1500 Outputs

SEAT TRANSPORTER
RODACARGA S.A.
Necessity of transporting automotive seats from production lines to warehouses sorting according to the model.
Installation of Distributed Control System using Siemens equipment.

POWER HOUSE MONITORING LINARES, NUEVO LEON
SIGMA ALIMENTOS CONGELADOS S.A. DE C.V.
Necessity of monitoring system for new Plant in Power House, this system include:
5 Frick Compressor
2 Condenser
10 Cooling Room
2 Air Compressor
Energy Consumption monitoring
Installation of Centralized Control System with a Human Machine Interface (HMI) FixDmacs Intellution with Siemens PLC.

POUDER METERING AND DOSIFICATION
SIGMA ALIMENTOS CENTRO S.A. DE C.V.
Automatic pouder dosification for quality control and fast processing was required.
Installation of Control System based in a PLC for process control networked to a Recipe Server (Windows NT Server), Intellution FIX 32.